Stay Signed In
Do you want to access your site more quickly on this computer? Check this box, and your username and password will be remembered for two weeks. Click logout to turn this off.
Stay Safe
Do not check this box if you are using a public computer. You don't want anyone seeing your personal info or messing with your site.
All of the pictures on this site remain the property of benzguy,Vancouver Canada
They are Copy Right protected.
Window switch cleaning
These window switches came off my 126,they were very dirty and sticky,I used contact cleaner and a small brush to clean them and back in they went.They operate great now, you may have to clean them periodically.
Contact cleaner is a must.
You need to pry open each side of the switch with your flat head screw driver.
Tools needed for this is a small flat head screw driver
Yes I know it looks scary but its all very simple.
Remove the small brass toggle leavers
These brass toggle leavers need to be removed
Clean all of the springs with contact cleaner.
Clean all of these components including the small ball bearings
Look how dirty the inside of these switches are,coffee and pop spills
Reassemble springs on black tips
Once its all cleaned out,reassemble by putting in your brass toggle leavers,ball bearings in the center of the toggles.Springs will go inside the switches itself then you can put the switches back in and making sure they clip in.
All of the pictures on this site remain the property of benzguy,Vancouver Canada
They are Copy Right protected.
